Should you want to print a Bulldog Barbarian… Here’s one. Best paints would be Dragon Red from Army Painter and Maxx Darth (black) from Green Stuff World. But I’m biased about such things… Been posting more designs at MakerWorld than Thingiverse at this point, soooo… https://makerworld.com/en/models/176548
-
-
Cha’pa (Beaverfolk) Fighter stl
Here’s a Cha’pa (Beaverfolk) Fighter I just posted on Thingiverse A friend saw the badger I made and went to Oregon State, sooooooo… I guess Go Beavers! But also, the Spelljammer Dungeons & Dragons stuff has been fun to play through. For those that want to go beyond some of the existing animal hybrids, here’s a Beaverfolk (Cha’pa) fighter. Could probably use as an Opsu (Possumfolk) fighter as well, given the similarities and all that (if you just thinned the tail to make it look more like a possum tail). It’s unlicensed, so remix away and have fun! The badger turned out better, but throw this into blender, add some…
-
3D Printable Model to Make A Gamma World or Warhammer Gorilla Space Warrior (or buddy)
It’s cold out. So gaming indoors is still a thing! Feel free to remix this, replace the laser gun with a sword or staff or other instrument of whatever. https://www.thingiverse.com/thing:5923477
-
3D Printable Mold to Make Clay Cobblestones
Not life-sized cobblestones, mind you. But those for miniature wargaming. Although according to the size of the printer, I guess you could. The goal with this stl was to be able to print a thing, press clay into it, and maybe experiment with other materials. Theoretically it could be infilled and used as actual terrain pieces, but there are probably better pieces for that out there for download. https://www.thingiverse.com/thing:5917937
-
Dragon Head Trophy .stl
For the other 3d printing nerds out there, here’s a dragon head trophy project that I posted at https://www.thingiverse.com/thing:5438314 . It’s two pieces so easy to design new toppers for the trophy.
-
3D Print A Dinosaur!
It’s not an Ankylosaurus, it’s a Paleoscincus. It’s on Thingiverse at https://www.thingiverse.com/thing:5424027 This is part of the Monster Manual project I’ve been working on. Hope you enjoy! https://docs.google.com/spreadsheets/d/1nAJ4y2JxQU2lb6jWOzqU9GdQtHIS4Z3P3NDHgOMEE9I/edit?usp=sharing
-
3D Print The Monster Manual Sheet Updated
I posted this earlier but it got a bunch of updates so thought I’d post it again. Here’s a link for a Google Sheet to download the stl file for every creature in the 1st Edition Dungeons and Dragons Monster Manual: https://docs.google.com/spreadsheets/d/1nAJ4y2JxQU2lb6jWOzqU9GdQtHIS4Z3P3NDHgOMEE9I The first version would have cost about $50 to buy some of the .stl files to print creatures and I didn’t break out all the sub-creations. For example, for Lycanthropes I just did one, but now there’s a seperate tab for dragons, demons, devils, golems, lycanthropes, dinosaurs, and giants. I added some new designs to get the cost to acquire all the .stl files down to $6 (it…
-
STL to print a Lynx
Posted a lynx .stl and Zbrush file up to Thingiverse (see below) at https://www.thingiverse.com/thing:5418854 for anyone interested. Coloring is a little different and the tail is longer if anyone needs a bobcat. Modeled a tad bit after my cat Fredo, who’s also got some chubby cat thighs. If you imagine the trouble a lynx would get into living in a house, that’s pretty much him. Although he fetches as well as the dog does and we’ve trained him to sit maybe 75% of the time. So he’s not all bad. Much blood was had before he learned to be careful with his claws (he’s almost two and that wasn’t really…
-
Dragonne .stl from the Monster Manual
For all you D&D print and paint nerds out there, here’s another design from the 1st edition Monster Manual: Dragonne. There are two versions (wings opened and wings closed): https://www.thingiverse.com/thing:5413146 and https://www.thingiverse.com/thing:5415625. I’ve found the supports are easier with the wings opened There are two versions available for download. This is part of the larger Monster Manual project. To see all the .stl files (only a few are mine) check out https://docs.google.com/spreadsheets/d/1nAJ4y2JxQU2lb6jWOzqU9GdQtHIS4Z3P3NDHgOMEE9I/edit#gid=0.
-
Neo-Otyugh from the 1E Monster Manual
Published a 3d model for printing, along with the source Blender file but some experimentation in ZBrush later and here’s an stl of a Neo-Otyugh ready to print. Also please find the .zpr file in the same Thingiverse post at https://www.thingiverse.com/thing:5404664. It printed easily and there weren’t that many supports to remove, although I might focus on fewer supports in future models. I’m painting it so I’ll post a photo to the Thing when it’s done.
