Tiny Deathstars of Foulness

Push Notifications can be used in most every service OS X Mavericks Server (Server 3) can run. Any service that requires Push Notifications will provide the ability to setup APNS during the configuration of the service. But at this point, I usually just set up Push Notifications when I setup a new server.
Screen Shot 2013-10-05 at 8.16.40 AMTo enable Push Notifications for services, you’ll first need to have a valid AppleID. Once you have an AppleID, open the Server app and then click on the name of the server. At the Overview screen, click on Settings.

Screen Shot 2013-10-05 at 8.16.52 AM

At the Settings screen for your server, click on the check-box for “Enable Apple push notifications.”

Screen Shot 2013-10-05 at 8.17.07 AM

At the Apple Push Notification Services certificate screen, enter an AppleID if you have not yet configured APNS and click on OK. The Apple Push Notification Service certificate will then be configured.

Screen Shot 2013-10-05 at 8.17.31 AM

The certificate is valid for one year, by default. Administrators receive an alert when the certificate is due to expire. To renew, open the same screen and click on the Renew button.

October 23rd, 2013

Posted In: Mac OS X Server

Tags: , , , , , , , , , , ,

The swupd.plist file used to daisy chain multiple servers so they act as a cascade of software update servers. The new path for the property list is /Library/Server/Software Update/Config/swupd.plist. Here, the metaIndexURL key is sill the location that points to an internal Software Update Server that the server you are editing should look to for updates.

To set a server to look at another internal server for software updates, edit the metaIndexURL key in the /Library/Server/Software Update/Config/swupd.plist file to include the path to the new server. The path should always have /content/meta/mirror-config-1.plist after the FQDN of the host name. So if your internal software update server was called the command to set that as the upstream software update server would be:

defaults write /Library/Server/Software\ Update/Config/swupd metaiIndexURL “”

This is a minor change, but one that might be frustrating if you were still trying to cascade updates the old way. If you’re new to cascading updates, this is a pretty straight forward configuration change, run from a Terminal command. It’s also worth noting that there are a few other settings in this file that could come in handy. You can limit bandwidth using the limitBandwidth key, purge any old updates using the PurgeUnused key, set a max download speed using the maxDownloadSpeed key, configure the Software Update Server TCP port using the portToUse key (automatically set to 8088), change the path to the updates (e.g. if you mv them and then want to repoint to the new location without downloading them all again) using the updatesDocRoot key, etc. Overall, the settings align with the old settings, but just in a new place.

Note: The keys above correspond to settings found in the following command:

sudo serveradmin settings swupdate

The list of settings is as follows:

swupdate:checkError = no
swupdate:limitBandwidth = no
swupdate:PurgeUnused = yes
swupdate:portToUse = 8088
swupdate:autoEnable = yes
swupdate:valueBandwidth = 0
swupdate:syncStatus = "Initializing"
swupdate:autoMirror = yes
swupdate:syncBandwidth = 0
swupdate:updatesDocRoot = "/Library/Server/Software Update/Data/"
swupdate:autoMirrorOnlyNew = no

October 22nd, 2013

Posted In: Mac OS X Server, Mass Deployment

Tags: , , , , , , , , ,

Web Services in Mac OS X, Mac OS X Server, Linux and most versions of Unix are provided by Apache, an Open Source project that much of the Internet owes its origins to. Apache owes its name to the fact that it’s “a patchy” service. These patches are often mods, or modules. Configuring web services is as easy in OS X Mavericks Server (10.9) as it has ever been. To set up the default web portal, simply open the Server app, click on the Websites service and click on the ON button.

Screen Shot 2013-10-07 at 7.06.28 PMAfter a time, the service will start. Once running, click on the View Server Website link at the bottom of the pane.

Screen Shot 2013-10-07 at 7.07.01 PM

Provided the stock OS X Server page loads, you are ready to use OS X Server as a web server.

Screen Shot 2013-10-07 at 7.07.43 PMBefore we setup custom sites, there are a few things you should know. The first is, the server is no longer really designed to remove the default website. So if you remove the site, your server will exhibit inconsistent behavior. Also, don’t remove the files that comprise the default site. Instead just add sites, which is covered next. Webmail is gone. You don’t have to spend a ton of time looking for it as it isn’t there. Also, Mountain Lion Server added web apps, which we’ll briefly review later in this article as well, as those continue in Mavericks Server.  Finally, enabling PHP and Python on sites is done globally, so this setting applies to all sites hosted on the server.

Screen Shot 2013-10-07 at 8.04.38 PMNow that we’ve got that out of the way, let’s add our first custom site. Do so by clicking on the plus sign. At the New Web Site pane, you’ll be prompted for a number of options. The most important is the name of the site, with other options including the following:

  • Domain Name: The name the site is accessible from. The default sites do not have this option as they are accessible from all names that resolve to the server.
  • IP Address: The IP address the site listens on. Any means the site is available from every IP address the server is configured to use. The default websites do not have this option as they are accessible from all addresses automatically
  • Port: By default, sites without SSL run on port 80 on all network interfaces, and sites with SSL run on port 443 on all network interfaces. Use the Port field to use custom ports (e.g., 8080). The default sites do not have this option as they are configured to use 80 and 443 for default and SSL-based communications respectively.
  • SSL Certificate: Loads a list of SSL certificates installed using Keychain or the SSL Certificate option in the Settings pane of the Server application
  • Store Site Files In: The directory that the files that comprise the website are stored in. These can be placed into the correct directory using file shares or copying using the Finder. Click on the drop-down menu and then select Other to browse to the directory files are stored in.
  • Who Can Access: By default Anyone (all users, including unauthenticated guests) can access the contents of sites. Clicking on Anyone and then Customize… brings up the “Restrict access to the following folders to a chosen group” screen, where you can choose web directories and then define groups of users who can access the contents.
  • Additional Domains: Click on the Edit… button to bring up a simple list of domain names the the site also responds for (e.g. in addition to, add
  • Redirects: Click on the Edit… button to bring up a list of redirects within the site. This allows configuring redirects to other sites. For example, use /en to load or /cn to load
  • Aliases: Click on the Edit… button to load a list of aliases. This allows configuring redirects to folders within the same server. For example, /en loads /Library/Server/Web/Data/Sites/Default
  • Index Files: Click on the Edit… button to bring up a list of pages that are loaded when a page isn’t directly indicated. For example, when visiting, load the wp.php page by default.
  • Advanced Options: The remaining options are available by clicking on the “Edit Advanced Settings…” button.
  • Enable Server Side Includes: Allows administrators to configure leveraging includes in web files, so that pieces of code can be used across multiple pages in sites.
  • Allow overrides using .htaccess files: Using a .htaccess file allows administrators to define who is able to access a given directory, defining custom user names and passwords in the hidden .htaccess file. These aren’t usually required in an OS X Server web environment as local and directory-based accounts can be used for such operations. This setting enables using custom .htaccess files instead of relying on Apple’s stock web permissions.
  • Allow folder listing: Enables folder listings on directories of a site that don’t have an Index File (described in the non-Advanced settings earlier).
  • Allow CGI execution: Enables CGI scripts for the domain being configured.
  • Use custom error page: Allows administrators to define custom error pages, such as those annoying 404 error pages that load when a page can’t be found
  • Make these web apps available on this website: A somewhat advanced setting, loads items into the webapps array, which can be viewed using the following command:  sudo serveradmin settings web:definedWebApps

Once you’ve configured all the appropriate options, click on Done to save your changes. The site should then load. Sites are then listed in the list of Websites.

The Apache service is most easily managed from the Server app, but there are too many options in Apache to really be able to put into a holistic graphical interface. The easiest way to manage the Websites service in OS X Mavericks server is using the serveradmin command. Apache administrators from other platforms will be tempted to use the apachectl command to restart the Websites service. Instead, use the serveradmin command to do so. To start the service:

sudo serveradmin start web

To stop the service(s):

sudo serveradmin stop web

And to see the status:

sudo serveradmin fullstatus web

Fullstatus returns the following information:

web:health = _empty_dictionary
web:readWriteSettingsVersion = 1
web:apacheVersion = "2.2"
web:servicePortsRestrictionInfo = _empty_array
web:startedTime = "2013-10-08 01:05:32 +0000"
web:apacheState = "RUNNING"
web:statusMessage = ""
web:ApacheMode = 2
web:servicePortsAreRestricted = "NO"
web:state = "RUNNING"
web:setStateVersion = 1

While the health option typically resembles kiosk computers in the Computer Science departments of most major universities, much of the rest of the output can be pretty helpful including the Apache version, whether the service is running, any restrictions on ports and the date/time stamp that the service was started.

To see all of the settings available to the serveradmin command, run it, followed by settings and then web, to indicate the Websites service:

sudo serveradmin settings web

The output is pretty verbose and can be considered in two sections, the first includes global settings across sites as well as the information for the default sites that should not be deleted:

web:defaultSite:documentRoot = "/Library/Server/Web/Data/Sites/Default"
web:defaultSite:serverName = ""
web:defaultSite:realms = _empty_dictionary
web:defaultSite:redirects = _empty_array
web:defaultSite:enableServerSideIncludes = no
web:defaultSite:customLogPath = ""/var/log/apache2/access_log""
web:defaultSite:webApps = _empty_array
web:defaultSite:sslCertificateIdentifier = ""
web:defaultSite:fullSiteRedirectToOtherSite = ""
web:defaultSite:allowFolderListing = no
web:defaultSite:serverAliases = _empty_array
web:defaultSite:errorLogPath = ""/var/log/apache2/error_log""
web:defaultSite:fileName = "/Library/Server/Web/Config/apache2/sites/0000_any_80_.conf"
web:defaultSite:aliases = _empty_array
web:defaultSite:directoryIndexes:_array_index:0 = "index.html"
web:defaultSite:directoryIndexes:_array_index:1 = "index.php"
web:defaultSite:directoryIndexes:_array_index:2 = "/wiki/"
web:defaultSite:directoryIndexes:_array_index:3 = "default.html"
web:defaultSite:allowAllOverrides = no
web:defaultSite:identifier = "37502141"
web:defaultSite:port = 80
web:defaultSite:allowCGIExecution = no
web:defaultSite:serverAddress = "*"
web:defaultSite:requiresSSL = no
web:defaultSite:proxies = _empty_dictionary
web:defaultSite:errorDocuments = _empty_dictionary
web:defaultSecureSite:documentRoot = "/Library/Server/Web/Data/Sites/Default"
web:defaultSecureSite:serverName = ""
web:defaultSecureSite:realms = _empty_dictionary
web:defaultSecureSite:redirects = _empty_array
web:defaultSecureSite:enableServerSideIncludes = no
web:defaultSecureSite:customLogPath = ""/var/log/apache2/access_log""
web:defaultSecureSite:webApps = _empty_array
web:defaultSecureSite:sslCertificateIdentifier = ""
web:defaultSecureSite:fullSiteRedirectToOtherSite = ""
web:defaultSecureSite:allowFolderListing = no
web:defaultSecureSite:serverAliases = _empty_array
web:defaultSecureSite:errorLogPath = ""/var/log/apache2/error_log""
web:defaultSecureSite:fileName = "/Library/Server/Web/Config/apache2/sites/0000_any_443_.conf"
web:defaultSecureSite:aliases = _empty_array
web:defaultSecureSite:directoryIndexes:_array_index:0 = "index.html"
web:defaultSecureSite:directoryIndexes:_array_index:1 = "index.php"
web:defaultSecureSite:directoryIndexes:_array_index:2 = "/wiki/"
web:defaultSecureSite:directoryIndexes:_array_index:3 = "default.html"
web:defaultSecureSite:allowAllOverrides = no
web:defaultSecureSite:identifier = "37502140"
web:defaultSecureSite:port = 443
web:defaultSecureSite:allowCGIExecution = no
web:defaultSecureSite:serverAddress = "*"
web:defaultSecureSite:requiresSSL = yes
web:defaultSecureSite:proxies = _empty_dictionary
web:defaultSecureSite:errorDocuments = _empty_dictionary
web:dataLocation = "/Library/Server/Web/Data"
web:mainHost:keepAliveTimeout = 15.000000
web:mainHost:maxClients = "50%"

The second section is per-site settings, with an array entry for each site:

web:customSites:_array_index:0:documentRoot = "/Library/Server/Web/Data/Sites/"
web:customSites:_array_index:0:serverName = ""
web:customSites:_array_index:0:realms = _empty_dictionary
web:customSites:_array_index:0:redirects = _empty_array
web:customSites:_array_index:0:enableServerSideIncludes = no
web:customSites:_array_index:0:customLogPath = "/var/log/apache2/access_log"
web:customSites:_array_index:0:webApps = _empty_array
web:customSites:_array_index:0:sslCertificateIdentifier = ""
web:customSites:_array_index:0:fullSiteRedirectToOtherSite = ""
web:customSites:_array_index:0:allowFolderListing = no
web:customSites:_array_index:0:serverAliases = _empty_array
web:customSites:_array_index:0:errorLogPath = "/var/log/apache2/error_log"
web:customSites:_array_index:0:fileName = "/Library/Server/Web/Config/apache2/sites/"
web:customSites:_array_index:0:aliases = _empty_array
web:customSites:_array_index:0:directoryIndexes:_array_index:0 = "index.html"
web:customSites:_array_index:0:directoryIndexes:_array_index:1 = "index.php"
web:customSites:_array_index:0:directoryIndexes:_array_index:2 = "/wiki/"
web:customSites:_array_index:0:directoryIndexes:_array_index:3 = "default.html"
web:customSites:_array_index:0:allowAllOverrides = no
web:customSites:_array_index:0:identifier = "41179886"
web:customSites:_array_index:0:port = 80
web:customSites:_array_index:0:allowCGIExecution = no
web:customSites:_array_index:0:serverAddress = "*"
web:customSites:_array_index:0:requiresSSL = no
web:customSites:_array_index:0:proxies = _empty_dictionary
web:customSites:_array_index:0:errorDocuments = _empty_dictionary

The final section (the largest by far) includes array entries for each defined web app. The following shows the entry for a Hello World Python app:

web:definedWebApps:_array_index:20:requiredWebAppNames = _empty_array
web:definedWebApps:_array_index:20:includeFiles = _empty_array
web:definedWebApps:_array_index:20:requiredModuleNames = _empty_array
web:definedWebApps:_array_index:20:startCommand = ""
web:definedWebApps:_array_index:20:sslPolicy = 0
web:definedWebApps:_array_index:20:requiresSSL = no
web:definedWebApps:_array_index:20:requiredByWebAppNames = _empty_array
web:definedWebApps:_array_index:20:launchKeys:_array_index:0 = "org.postgresql.postgres"
web:definedWebApps:_array_index:20:proxies = _empty_dictionary
web:definedWebApps:_array_index:20:preflightCommand = ""
web:definedWebApps:_array_index:20:stopCommand = ""
web:definedWebApps:_array_index:20:name = "org.postgresql.postgres"
web:definedWebApps:_array_index:20:displayName = ""

Each site has its own configuration file defined in the array for each section. By default these are stored in the /Library/Server/Web/Config/apache2/sites directory, with /Library/Server/Web/Config/apache2/sites/ being the file for the custom site we created previously. As you can see, many of the options available in the Server app are also available in these files:

<VirtualHost *:80>
DocumentRoot "/Library/Server/Web/Data/Sites/"
DirectoryIndex index.html index.php /wiki/ default.html
CustomLog /var/log/apache2/access_log combinedvhost
ErrorLog /var/log/apache2/error_log

<IfModule mod_ssl.c>
SSLEngine Off
SSLProtocol -ALL +SSLv3 +TLSv1
SSLProxyEngine On
SSLProxyProtocol -ALL +SSLv3 +TLSv1

<Directory “/Library/Server/Web/Data/Sites/”>
Options All -Indexes -ExecCGI -Includes +MultiViews
AllowOverride None
<IfModule mod_dav.c>
Deny from all
ErrorDocument 403 /customerror/websitesoff403.html


The serveradmin command can also be used to run commands. For example, to reset the service to factory defaults, delete the configuration files for each site and then run the following command:

sudo serveradmin command web:command=restoreFactorySettings

The final tip I’m going to give in this article is when to make changes with each app. I strongly recommend making all of your changes in the Server app when possible. When it isn’t, use serveradmin and when you can’t make changes in serveradmin, only then alter the configuration files that come with the operating system by default. I also recommend keeping backups of all configuration files that are altered and a log of what was altered in each, in order to help piece the server back together should it become unconfigured miraculously when a softwareupdate -all is run next.

October 22nd, 2013

Posted In: Mac OS X Server

Tags: , , , , , , , , , , , , , , , , , ,

The NetBoot service allows administrators of OS X computers to leverage images hosted on a server to boot computers to a central location and put a new image on them, upgrade them and perform automations based on upgrades and images. Since the very first versions of OS X, the service has been called NetBoot. In the Server app, Apple provides a number of options surrounding the NetInstall service, based on Automator-style actions, now calling the service NetInstall.

The first step to configuring the NetInstall service is to decide what you want the service to do. There are three options available in System Image Utility (available under the Tools menu of the Server app in OS X Server):

  • Create a NetBoot Image: Allows Macs to boot over the network to a disk image hosted on a server.
  • Create a NetInstall Image: Leverage NetBoot as a boot disk so that an image hosted on a server can be used to run an OS X installer.
  • Create a NetRestore Image: Leverage NetBoot as a boot disk so that you can restore a computer that has been configured over a network. Use this option to restore an image that has been prepared.

For the purposes of this example, we’re going to use an OS X Mavericks (10.9) installer running Server 3 to boot an OS X computer over the network. The first step in doing so is to create a Network Disk Image of 10.9, or the 10.9 installation media (which is the Install OS X Mavericks bundle for this example). Before setting it up, download the Install OS X Mavericks installer app into the /Applications directory from the App Store.

To then set up the NetBoot disk image (you can’t start the NetInstall service until you give it an image to serve), often referred to as the NetBoot set, open the Server app and then click on System Image Utility from the Tools menu of OS X.

Screen Shot 2013-10-07 at 1.29.50 PMWhen System Image Utility opens, click on the Install OS X Mountain Lion entry in the list of available sources. Then, in the list of options, click on NetBoot Image and then click on the Continue button.

Screen Shot 2013-10-07 at 1.30.19 PMAt the Image Settings screen, enter the name the NetBoot set will have in the Network Disk field. Then, enter a description of what is on the NetBoot set in the Description field. If the image will be served from multiple servers, check the box for “Image will be served from more than one server.”

Then provide an account name, short name and password in the Image Settings screen. Once provided, click Create to generate the Network Disk Image.

Screen Shot 2013-10-07 at 1.31.17 PMWhen prompted, click on the Agree button to accept the licensing agreement.

Screen Shot 2013-10-07 at 1.32.04 PMThen, when prompted, select a location to store the Disk Image, provide any tags to be applied to the files that comprise the image and click on Save.Screen Shot 2013-10-07 at 1.32.58 PMThe computer will then start creating the NetBoot set. Once finished, it’s time to set up the NetInstall service in OS X Mountain Lion Server. To get started, go back to the Server app.Screen Shot 2013-10-07 at 1.33.23 PMFirst, define which disk will host NetBoot Images. To do so, click on the Edit Storage Settings button. At the Storage Settings overlay, select the volume that Images will be hosted as well as the volume that Client Data will be hosted. The Image is what you are creating and the Client Data is dynamic data stored in images.

Screen Shot 2013-10-07 at 1.34.01 PMIf you only have one disk, as in this example, click on “Images & Client Data” for that disk. Then click on the OK button. Once you’ve selected a disk to store your image, we need to copy the disk image into the Library/NetBoot/NetBootSP0 folder of the disk used for images. Once in the appropriate folder, click on the Edit button for the Enable NetInstall on: field

Screen Shot 2013-10-07 at 1.38.36 PM

Check the box for the interface you want to serve images over (if you only have one then it’s pretty obvious which interface this will be. Click on the OK button to save your settings. Then, click on the Images tab.

Screen Shot 2013-10-07 at 1.57.25 PMEach server can host multiple images. The Images tab displays a list of NetBoot images stored in the Library/NetBoot/NetBootSP0 directory. By default, images have a red indicator light. This means they’re not being served over any specific protocol yet. Double-click on an image.

Screen Shot 2013-10-07 at 1.57.56 PMAt the image settings screen, check the box for “Make available over” and for many environments, select NFS as the protocol. Note, you can also restrict access to the image to certain models of Apple computers and/or certain MAC addresses by using the “Image is visible to” and “Restrict access to this images” options respectively. Additionally, use the Make this image available for diskless booting option to allow computers without hard drives to boot to the image.

Screen Shot 2013-10-07 at 1.58.57 PM

Click on the Done button and the image will appear as green in the list of images. Click on the image and then click on the cog-wheel icon. Click on “Use as Default Boot Image” to set an image to be the default images computers boot to when booting to NetBoot. Now, it’s as easy as clicking on the ON button. Do so to start the service.

Screen Shot 2013-10-07 at 1.59.32 PMOnce started, open a Terminal window. Here, let’s get a status of the service using the serveradmin fullstatus option (along with the service name, which is still netboot from the command line):

sudo serveradmin fullstatus netboot

The output of which shows the various components, logs and states of components:

netboot:state = "RUNNING"
netboot:stateTFTP = "RUNNING"
netboot:readWriteSettingsVersion = 1
netboot:netBootConnectionsArray = _empty_array
netboot:logPaths:netBootLog = "/var/log/system.log"
netboot:dhcpLeasesArray = _empty_array
netboot:stateDHCP = "STOPPED"
netboot:stateHTTP = "RUNNING"
netboot:serviceCanStart = 0
netboot:timeOfSnapshot = "2013-10-07 18:39:33 +0000"
netboot:stateNFS = "RUNNING"
netboot:stateImageArray:_array_index:0:_array_index:0 = 0
netboot:stateImageArray:_array_index:0:_array_index:1 = 0
netboot:stateImageArray:_array_index:0:_array_index:2 = 0
netboot:stateImageArray:_array_index:0:_array_index:3 = 0
netboot:stateImageArray:_array_index:0:_array_index:4 = 2
netboot:stateImageArray:_array_index:1:_array_index:0 = 0
netboot:stateImageArray:_array_index:1:_array_index:1 = 0
netboot:stateImageArray:_array_index:1:_array_index:2 = 0
netboot:stateImageArray:_array_index:1:_array_index:3 = 0
netboot:stateImageArray:_array_index:1:_array_index:4 = 2
netboot:stateImageArray:_array_index:2:_array_index:0 = 0
netboot:stateImageArray:_array_index:2:_array_index:1 = 0
netboot:stateImageArray:_array_index:2:_array_index:2 = 0
netboot:stateImageArray:_array_index:2:_array_index:3 = 0
netboot:stateImageArray:_array_index:2:_array_index:4 = 2
netboot:stateImageArray:_array_index:3:_array_index:0 = 0
netboot:stateImageArray:_array_index:3:_array_index:1 = 0
netboot:stateImageArray:_array_index:3:_array_index:2 = 0
netboot:stateImageArray:_array_index:3:_array_index:3 = 0
netboot:stateImageArray:_array_index:3:_array_index:4 = 2
netboot:servicePortsRestrictionInfo = _empty_array
netboot:netBootClientsArray = _empty_array
netboot:servicePortsAreRestricted = "NO"
netboot:setStateVersion = 1
netboot:startedTime = ""
netboot:stateAFP = "RUNNING"

And to start the service when not running:

sudo serveradmin start netboot

There are also a number of settings available at the command line that are not in the graphical interface. For example, to allow writing to the NetBoot share:

sudo serveradmin settings netboot:netBootStorageRecordsArray:_array_index:0:readOnlyShare = no

Or to get more verbose logs:

sudo serveradmin settings netboot:logging_level = "HIGH"

To stop the service:

sudo serveradmin stop netboot

In the beginning of this article, I mentioned that ways to configure NetInstall images. I’ll cover NetInstall and NetRestore in later articles as they tend to be more involved workflow-wise than copying a volume into a Network Disk Image. But to end this one, many an old-school admin might wonder where all the settings went that used to be in the GUI. Well, serveradmin still maintains a lot of the older stuff. To see a list of all available settings, run serveradmin with the settings verb and then netboot:

sudo serveradmin settings netboot

If there was a feature you want to use (e.g. maximum users), you should see it in the resultant list:

netboot:netBootFiltersRecordsArray = _empty_array
netboot:netBootStorageRecordsArray:_array_index:0:sharepoint = yes
netboot:netBootStorageRecordsArray:_array_index:0:clients = yes
netboot:netBootStorageRecordsArray:_array_index:0:volType = "hfs"
netboot:netBootStorageRecordsArray:_array_index:0:okToDeleteSharepoint = no
netboot:netBootStorageRecordsArray:_array_index:0:readOnlyShare = no
netboot:netBootStorageRecordsArray:_array_index:0:path = "/"
netboot:netBootStorageRecordsArray:_array_index:0:okToDeleteClients = yes
netboot:netBootStorageRecordsArray:_array_index:0:volName = "Mav"
netboot:netBootStorageRecordsArray:_array_index:1:sharepoint = yes
netboot:netBootStorageRecordsArray:_array_index:1:clients = yes
netboot:netBootStorageRecordsArray:_array_index:1:volType = "hfs"
netboot:netBootStorageRecordsArray:_array_index:1:okToDeleteSharepoint = yes
netboot:netBootStorageRecordsArray:_array_index:1:readOnlyShare = no
netboot:netBootStorageRecordsArray:_array_index:1:path = "/Volumes/Base_Image"
netboot:netBootStorageRecordsArray:_array_index:1:okToDeleteClients = yes
netboot:netBootStorageRecordsArray:_array_index:1:volName = "Base_Image"
netboot:netBootStorageRecordsArray:_array_index:2:sharepoint = yes
netboot:netBootStorageRecordsArray:_array_index:2:clients = yes
netboot:netBootStorageRecordsArray:_array_index:2:volType = "hfs"
netboot:netBootStorageRecordsArray:_array_index:2:okToDeleteSharepoint = yes
netboot:netBootStorageRecordsArray:_array_index:2:readOnlyShare = no
netboot:netBootStorageRecordsArray:_array_index:2:path = "/Volumes/New Volume 1"
netboot:netBootStorageRecordsArray:_array_index:2:okToDeleteClients = yes
netboot:netBootStorageRecordsArray:_array_index:2:volName = "New Volume"
netboot:netBootPortsRecordsArray:_array_index:0:deviceAtIndex = "en3"
netboot:netBootPortsRecordsArray:_array_index:0:isEnabledAtIndex = yes
netboot:netBootPortsRecordsArray:_array_index:0:nameAtIndex = "Thunderbolt Ethernet"
netboot:logging_level = "MEDIUM"
netboot:filterEnabled = no
netboot:netBootImagesRecordsArray:_array_index:0:imageType = "netboot"
netboot:netBootImagesRecordsArray:_array_index:0:IsInstall = no
netboot:netBootImagesRecordsArray:_array_index:0:Kind = "1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:0 = "iMac10,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:1 = "iMac11,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:2 = "iMac11,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:3 = "iMac11,3"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:4 = "iMac12,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:5 = "iMac12,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:6 = "iMac13,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:7 = "iMac13,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:8 = "iMac13,3"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:9 = "iMac7,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:10 = "iMac8,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:11 = "iMac9,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:12 = "Mac-031B6874CF7F642A"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:13 = "Mac-27ADBB7B4CEE8E61"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:14 = "Mac-50619A408DB004DA"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:15 = "Mac-77EB7D7DAF985301"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:16 = "MacBook5,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:17 = "MacBook5,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:18 = "MacBook6,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:19 = "MacBook7,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:20 = "MacBookAir2,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:21 = "MacBookAir3,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:22 = "MacBookAir3,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:23 = "MacBookAir4,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:24 = "MacBookAir4,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:25 = "MacBookAir5,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:26 = "MacBookAir5,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:27 = "MacBookAir6,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:28 = "MacBookAir6,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:29 = "MacBookPro10,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:30 = "MacBookPro10,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:31 = "MacBookPro3,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:32 = "MacBookPro4,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:33 = "MacBookPro5,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:34 = "MacBookPro5,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:35 = "MacBookPro5,3"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:36 = "MacBookPro5,4"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:37 = "MacBookPro5,5"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:38 = "MacBookPro6,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:39 = "MacBookPro6,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:40 = "MacBookPro7,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:41 = "MacBookPro8,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:42 = "MacBookPro8,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:43 = "MacBookPro8,3"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:44 = "MacBookPro9,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:45 = "MacBookPro9,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:46 = "Macmini3,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:47 = "Macmini4,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:48 = "Macmini5,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:49 = "Macmini5,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:50 = "Macmini5,3"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:51 = "Macmini6,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:52 = "Macmini6,2"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:53 = "MacPro3,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:54 = "MacPro4,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:55 = "MacPro5,1"
netboot:netBootImagesRecordsArray:_array_index:0:DisabledSystemIdentifiers:_array_index:56 = "Xserve3,1"
netboot:netBootImagesRecordsArray:_array_index:0:Description = "NetBoot of OS X 10.9 (13A598) Install (7.14 GB)."
netboot:netBootImagesRecordsArray:_array_index:0:Name = "NetBoot of Install OS X Mavericks"
netboot:netBootImagesRecordsArray:_array_index:0:pathToImage = "/Library/NetBoot/NetBootSP0/NetBoot of Install OS X Mavericks.nbi/NBImageInfo.plist"
netboot:netBootImagesRecordsArray:_array_index:0:Index = 1280
netboot:netBootImagesRecordsArray:_array_index:0:osVersion = "10.9"
netboot:netBootImagesRecordsArray:_array_index:0:BackwardCompatible = no
netboot:netBootImagesRecordsArray:_array_index:0:SupportsDiskless = no
netboot:netBootImagesRecordsArray:_array_index:0:EnabledSystemIdentifiers = _empty_array
netboot:netBootImagesRecordsArray:_array_index:0:Language = "Default"
netboot:netBootImagesRecordsArray:_array_index:0:BootFile = "booter"
netboot:netBootImagesRecordsArray:_array_index:0:IsDefault = no
netboot:netBootImagesRecordsArray:_array_index:0:Type = "HTTP"
netboot:netBootImagesRecordsArray:_array_index:0:Architectures = "4"
netboot:netBootImagesRecordsArray:_array_index:0:IsEnabled = yes
netboot:netBootImagesRecordsArray:_array_index:0:RootPath = "NetBoot.dmg"
netboot:afpUsersMax = "50"

October 22nd, 2013

Posted In: Mac OS X Server

Tags: , , , , , , , , , ,