Synology provides SSH access, which allows you to do a number of things you can’t do with the GUI. To enable SSH, simply log in on the Synology and open Control Panel. From the Control Panel, scroll down to “Terminal & SNMP” in the sidebar and check the box for “Enable SSH service” and then click Apply. The device will then have SSH enabled. Open Terminal on your Mac or Windows device and let’s SSH into the root account of the IP address, done as follows (where 192.168.50.5 is the IP address of your Synology): ssh root@192.168.50.5 When prompted, enter the same admin password you normally use. You’ll then be…