Tag Archives: Enrollment

iPhone Mac OS X Mac OS X Server Mac Security Mass Deployment Microsoft Exchange Server Network Infrastructure

Configuring & Using Profile Manager 2 in OS X Mountain Lion Server

Profile Manager first appeared in OS X Lion Server as the Apple-provided tool for managing Apple devices, including Mobile Device Management (MDM) for iOS based devices as well as Profile management for OS X based computers, including MacBooks, MacBook Airs, Mac Minis, Mac Pros and iMacs running Mac OS X 10.7 and up. In OS X Mountain Lion, Apple has added a number of new features to Profile Manager, most notably the ability to push certain types of apps to mobile devices.

In this article, we’re going to look at setting up Profile Manager from scratch. If you’re upgrading to OS X Mountain Lion Server (10.8 Server) from OS X Lion Server (10.7 Server) then review this link for upgrade instructions.

Preparing For Profile Manager

Before we get started, let’s prep the system for the service. This starts with configuring a static IP address and properly configuring a host name for the server. In this example, the IP address will be 192.168.210.135 and the hostname will be mlserver3.pretendco.com. We’ll also be using a self-signed certificate, although it’s easy enough to generate a CSR and install it ahead of time. For the purposes of this example, we have installed Server from the App Store (and done nothing else with Server except open it the first time so it downloads all of its components from the web) and configured the static IP address using the Network System Preferences. Next, we’ll set the hostname using scutil.

sudo scutil --set HostName mlserver3.pretendco.com

Then the ComputerName:

sudo scutil --set ComputerName mlserver3.pretendco.com

And finally, the LocalHostName:

sudo scutil --set LocalHostName mdm

Now check changeip:

sudo changeip -checkhostname

The changeip command should output something similar to the following:

Primary address = 192.168.210.135
Current HostName = mlserver3.pretendco.com
DNS HostName = mlserver3.pretendco.com
The names match. There is nothing to change.
dirserv:success = "success"

f you don’t see the success and that the names match, you might have some DNS work to do next, according to whether you will be hosting DNS on this server as well. If you will be hosting your own DNS on the Profile Manager server, then the server’s DNS setting should be set to the IP address of the Server. To manage DNS, start the DNS service and configure as shown in the DNS article I did previously:

 

Provided your DNS is configured properly then changeip should work. If you’re hosting DNS on an Active Directory integrated DNS server or some other box then just make sure you have a forward and reverse record for the hostname/IP in question.

Now let’s open the Server app from the Applications directory. Here, use the Next Steps drawer at the bottom and verify that the Configure Network section reads that “Your network is configured properly” as can be seen here:

Profile Manager is built atop the web service, APNS and Open Directory. Therefore, let’s close the Next Steps drawer, click on the Web service and just hit start. While not required for Profile Manager to function, it can be helpful. We’re not going to configure anything else with this service in this article so as not to accidentally break Profile Manager. Do not click on anything while waiting for the service to start. While the indicator light can go away early, note that the Web service isn’t fully started until the path to the default websites is shown (the correct entry, as seen here, should be /Library/Server/Web/Data/Sites/Default) and a View Server Website link is shown at the bottom of the screen. If you touch anything too early then you’re gonna’ mess something up, so while I know it’s difficult to do so, be patient (honestly, it takes less than a minute, wait for it, wait for it, there!).

Once the Web service is started and good, click on the View Server Web Site link at the bottom and verify that the Welcome to Lion Server page loads.

Setting Up Profile Manager

Provided the Welcome to Lion Server page loads, click on the Profile Manager service. Here, click on the Configure button.

At the first screen of the Configure Device Management assistant, click on Next.

Assuming the computer is not yet an Open Directory master or Replica, and assuming you wish to setup a new Open Directory Master, click on Create a new Open Directory domain at the Configure Network Users and Groups screen. Then click on Next.

At the Directory Administrator screen, provide the username and password you’d like the Open Directory administrative account to have (note, this is going to be an Open Directory Master, so this example diradmin account will be used to authenticate to Workgroup Manager if we want to make changes to the Open Directory users, groups, computers or computer groups from there). Once you’re done entering the correct information, click Next.

At the Organization Information screen, enter your information (e.g. name of Organization and administrator’s email address). Keep in mind that this information will be in your certificate (and your CSR if you submit that for a non-self-signed certificate) that is used to protect both Profile Manager and Open Directory communications. Click Next.

At the Confirm Settings screen, make sure the information that will be used to configure Open Directory is setup correctly. Then click Set Up (as I’ve put a nifty red circle next to – although it probably doesn’t help you find it if it’s the only button, right?).

The Open Directory master is then created. Even if you’re tying this thing into something like Active Directory, this is going to be a necessary step. Once Open Directory is setup you will be prompted to provide an SSL Certificate.

This can be the certificate provided when Open Directory is initially configured, which is self-signed, or you can select a certificate that you have installed using a CSR from a 3rd party provider. At this point, if you’re using a 3rd party Code Signing certificate you will want to have installed it as well. Choose a certificate from the Certificate: drop-down list and then click on Next.

If using a self-signed certificate you will be prompted that the certificate isn’t signed by a 3rd party. Click Next if this is satisfactory.

You will then be prompted to enter the credentials for an Apple Push Notification Service (APNS) certificate. This can be any valid AppleID. It is best to use an institutional AppleID (e.g. push@krypted.com) rather than a private one (e.g. charles@krypted.com). Once you have entered a valid AppleID username and password, click Next.

Provided everything is working, you’ll then be prompted that the system meets the Profile Manager requirements. Click on the Finish button to complete the assistant.

When the assistant closes, you will be back at the Profile Manager screen in the Server application. Here, check the box for Sign Configuration Profiles.

The Code Signing Certificate screen then appears. Here, choose the certificate from the Certificate field.

Unless you’re using a 3rd party certificate there should only be one certificate in the list. Choose it and then click on OK. If you are using a 3rd party certificate then you can import it here, using the Import… selection.

If you host all of your services on the one server (Mail, Calendars, VPN, etc) then leave the box checked for Include configuration for services; otherwise uncheck it.

Now that everything you need is in place, click on the ON button to start the service and wait for it to finish starting.

Once started, click on the Open Profile Manager link and the login page will open. Adminsitrators can login to Profile Manager to setup profiles and manage devices.

The URL for this (for mlserver3.pretendco.com) is https://mlserver3.pretendco.com/profilemanager. Use the Everyone profile to automatically configure profiles for services installed on the server if you want them deployed to all users. Use custom created profiles for everything else.

Enrolling Into Profile Manager

To enroll devices for management, use the URL https://mdm.pretendco.com/MyDevices (replacing the hostname with your own). Click on the Profiles tab to bring up a list of profiles that can be installed manually.

From Profiles, you’ll need to install a Trust profile in order for the client to enroll. Tap or click on the Install button for the Trust Profile and complete the installation process.

Click back on the Devices tab. From here, click or tap on the Enroll button and complete the enrollment process on the client (following the defaults will suffice).

On the devices, you’ll then be prompted to install the profile. On iOS tap Install then Install then Done. On OS X, click Continue, then Install.

Once enrolled, you can wipe or lock the device from the My Devices portal. Management profiles from the MDM server are then used. Devices can opt out from management at any time. If you’re looking for more information on moving Managed Preferences (MCX) from Open Directory to a profile-based policy management environment, review this article.

If there are any problems when you’re first getting started, an option is always to run the wipeDB.sh script that resets the Profile Manager (aka, devicemgr) database. This can be done by running the following command:

sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB.sh

Automating Enrollment & Random Management Tips

The two profiles needed to setup a client on the server are accessible from the web interface of the Server app. Saving these two profiles to a Mac OS X computer then allows you to automatically enroll devices into Profile Manager using Apple Configurator, as shown in this previous article.

When setting up profiles, note that the username and other objects that are dynamically populated can be replaced through a form of variable expansion using payload variables in Profile Manager. For more on doing so, see this article.

Note: As the database hasn’t really changed, see this article for more information on backing up and reindexing the Profile Manager database.

Device Management

Once you’ve got devices enrolled, those devices can easily be managed from a central location. The first thing we’re going to do is force a passcode on a device. In this case, it’s an iPad. We’re going to click on the device in Profile Manager’s admin portal, located at https://<SERVERNAME>/profilemanager (in this case https://mdm.pretendco.com/profilemanager).

From the device (or user, group, user group or device group objects), click on the Profile tab and then click on the Edit button.

Here, you can configure a number of settings on devices. There are sections for iOS specific devices, OS X specific settings and those applicable to both platforms. Let’s configure a passcode requirement for an iPad. Click on Passcode, then click on Configure.

At the Passcode settings, let’s check the box for Allow simple value and then set the Minimum Passcode Length to 4. I find that with iOS, 4 characters is usually enough as it’ll wipe far before someone can brute force that. Click OK to commit the changes. Once configured, click Save.

At the “Save Changes?” screen, click Save. The device then prompts you to set a passcode a few moments later.

The next thing we’re going to do is push an app. To do so, first find an app in your library that you want to push out. Right-click (or control-click) on the app and click on Show in Finder. You can copy the app from your library or browse to it at the location it is in later.

Then, from the https://<SERVERNAME>/profilemanager portal, click on an object to manage (in this case it’s a group called Demo) and click on the Apps tab.

From the Apps tab, click on the cog wheel icon and then click on Edit Apps.

At the Add Apps screen, click on upload and then browse to the app we found earlier.

The app is then uploaded and displayed in the list. Click Add to add to the selected group. Then, click on Done. Then click on Save… and an App Installation dialog will appear on the iOS device you’re pushing the app to.

At the App Installation screen on the iPad, click on the Install button and the app will instantly be copied to the last screen of apps on the device. Tap on the app to open it and verify it works. Assuming it does open then it’s safe to assume that you’ve run the App Store app logged in as a user who happens to own the app. You can sign out of the App Store and the app will still open. However, you won’t be able to update the app as can be seen here.

This brings up an interesting limitation of how Profile Manager interacts with the App Store. It kinda’ doesn’t. If I were pushing apps to elementary school iPads in a 1:1 I could either use Apple Configurator (if I wanted to burn up a VPP code per student per year) or I could use iTunes (if I wanted a labor intensive process of restoring an iPad per computer rather than a parallel process). But either way, I’m gonna’ stay away from Profile Manager for apps.

So if you push an app to a device and the user taps on the app and the screen goes black then make sure the app is owned by the AppleID signed into the device. If it is, have the user open App Store and update any other app and see if the app then opens.

Finally, let’s wipe a device. From the Profile Manager web interface, click on a device and then from the cog wheel icon at the bottom of the screen, select wipe.

At the Wipe screen, click on the device and then click on the Wipe button again. The iPad then says Resetting iPad and just like that, the technical walkthrough is over.

Note: For fun, you can use the MyDevices portal to wipe your iPad from the iPad itself.

Conclusion

So where are all these new features that justify a new version number? To quote Apple’s Profile Manager 2 page:

Profile Manager simplifies deploying, configuring, and managing them all. It’s one place where you control everything: You can create profiles to set up user accounts for mail, calendar, contacts, and messages; configure system settings; enforce restrictions; set PIN and password policies; and more. Because it’s integrated with the Apple Push Notification service, Profile Manager can send out updated configurations over the air, automatically. And it includes web-based administration, so you can manage your server from any modern web browser. Profile Manager even gives users access to a self-service web portal where they can download and install new configuration profiles, as well as clear passcodes and remotely lock or wipe their Mac, iPhone, or iPad if it’s lost or stolen.

Wait, it did that before… Which isn’t to say that for the money, Profile Manager isn’t an awesome tool. Apps such as Casper MDM, AirWatch, Zenprise, etc all have far more options, but aren’t as easy to install and nor do they come at such a low price point. Profile Manager is a great option if all of the tasks you need to perform are available within the tool. If not, then it’s worth a look, if only as a means to learn more about the third party tools you’ll ultimately end up using. One thing I can say for it is that Profile Manager is a little faster and seems much more stable (in fact, Apple has now published scalability numbers, which they have rarely done in the past). You can also implement newer features with it, including Gatekeeper and Messages.

Mac OS X Mac OS X Server Mac Security Mass Deployment

Automating Profile Manager Enrollment Through DeployStudio

When planning to migrate from managed preferences to profiles, one of the important aspects to consider is automated enrollment. One of the more important aspects of automating a traditional managed preferences environment is to automate the binding to directory services. You do not bind to Profile Manager; however, you do enroll devices. Much like binding computers to Lion Server’s Open Directory (by default), certificates and host names are important aspects of the enrollment process.

Much as with local managed preferences, management via profiles can be done through the command line and without any involvement from a centralized source. I had written an article awhile back on using profiles from the command line.

You can also instead enroll devices into Profile Manager. Previously, I had looked at configuring Profile Manager. Manual enrollment in Profile Manager is the same as enrollment from iOS. But instead of using Apple Configurator to automate enrollment, you’ll use your existing imaging solution for automated enrollment of Mac OS X based clients. Therefore, we’ll use DeployStudio as an example for automating enrollment at imaging time.

To get started, you’ll need a functional DeployStudio configuration. You’ll also need a functional Profile Manager configuration. From within Profile Manager, click on the plus sign (“+”) in the lower left corner of DeployStudio and click on Enrollment Profile. Then click on the New Enrollment Profile entry that was created and click on the Download button to download the profile onto the server (when it attempts to install, simply click cancel to cache it to your ~/Downloads directory).

Click in the drop-down menu in the upper right hand corner of the screen and then click on Download Trust Profile. This will download the Trust Profile for the MDM solution to the client (when it attempts to install, simply click cancel to cache it to your ~/Downloads directory).

Next, drag the cached profiles into the ConfigurationProfiles directory of the DeployStudio repository. Now that you have the profiles that will be required for automated enrollment, open DeployStudio Admin (if it was open before, close it and then re-open it once you have copied the profiles to the DeployStudio repository). From within DeployStudio, we will create a new workflow, here called “Deploy Lion with Enrollment”. We will then choose to restore a target volume and automate the task.

Next, click on the plus sign (“+”) to add a new workflow item, sliding the task selection screen out automatically.

Next, drag the Automatic Enrollment Task item into the workflow. Once present, choose Previous task target from the Target Volume field. Next, choose the enrollment profile in the Enrollment profile field. Also choose the Trust profile that you just downloaded from the Trust profile field. Finally, check the Automate box and save your workflow.

Finally, we’ll add a Configure task to set the hostname (note that your workflows may already be far more flushed out than mine here. Click on Save and then test the workflow.

Once booted, if you are automatically enrolled then the process was a success. You should be able to see the device in Profile Manager.

iPhone Mac OS X Mac OS X Server Mac Security Mass Deployment

Setting Up Profile Manager in Lion Server

New in Lion Server, Profile Manager is the most substantial new service added to Mac OS X Server in recent memory. A lot of engineering has gone into it since the introduction in 10.7.0 and in 10.7.3, Profile Manager represents a service that is ready for actual deployments. I have written a number of articles about Profile Manager, but they all revolved around working with Profile Manager once the service is setup and configured. Therefore, I have decided to document the steps used to take a system out of the box and configure it for Profile Manager.

Before we get started, let’s prep the system for the service. This starts with configuring a static IP address and properly configuring a host name for the server. In this example, the IP address will be 192.168.210.75 and the hostname will be mdm.pretendco.com. We’ll also be using a self-signed certificate, although it’s easy enough to generate a CSR and install it ahead of time. For the purposes of this example, we have installed Server from the App Store (and done nothing else with Server except open it the first time so it downloads all of its components from the web) and configured the static IP address using the Network System Preferences. Next, we’ll set the hostname using scutil.

sudo scutil --set HostName mdm.pretendco.com

Then the ComputerName:

sudo scutil --set ComputerName mdm.pretendco.com

And finally, the LocalHostName:

sudo scutil --set LocalHostName mdm

Now check changeip:

sudo changeip -checkhostname

The changeip command should output something similar to the following:

Primary address = 192.168.210.75

Current HostName = mdm.pretendco.com
DNS HostName = mdm.pretendco.com

The names match. There is nothing to change.
dirserv:success = "success"

Provided the IP address and hostname are correct, then if you don’t see the success and that the names match, you might have some DNS work to do next, according to whether you will be hosting DNS on this server as well. If you will be hosting your own DNS on the Profile Manager server, then the server’s DNS setting should be set to the IP address of the Server. I have downloaded and installed the Server Admin Tools and then opened Server Admin, connected to the server and configured just the mdm server as a single record in the pretendco.com zone:

Provided your DNS looks just like this (your host name not mine) then changeip should work. If you’re hosting DNS on an Active Directory integrated DNS server or some other box then just make sure you have a forward and reverse record for the hostname/IP in question.

Now let’s open the Server app from the Applications directory. Here, use the Next Steps drawer at the bottom and verify that the Configure Network section reads that “Your network is configured properly” as can be seen here:

Profile Manager is built atop the web service, APNS and Open Directory. Therefore, let’s close the Next Steps drawer, click on the Web service and just hit start. We’re not going to configure anything else with this service in this article so as not to accidentally break Profile Manager. Do not click on anything while waiting for the service to start. While the indicator light can go away early, note that the Web service isn’t fully started until the path to the default website is shown instead of /var/empty (the correct entry, as seen here, should be /Library/Server/Web/Data/Sites/Default). If you touch anything too early then you’re gonna’ mess something up, so while I know it’s difficult to do so, be patient (honestly, it takes less than a minute, wait for it, wait for it, there!).

Once the Web service is started and good, click on the View Server Web Site link at the bottom and verify that the Welcome to Lion Server page loads.

Provided the Welcome to Lion Server page loads, click on the Profile Manager service. Here, click on the Configure button.

At the first screen of the Configure Device Management assistant, click on Next.

At the Configure Network Users and Groups screen, click on Next.

At the Directory Administrator screen, provide the username and password you’d like the Open Directory administrative account to have (note, this is going to be an Open Directory Master, so this example diradmin account will be used to authenticate to Workgroup Manager if we want to make changes to the Open Directory users, groups, computers or computer groups from there). Once you’re done entering the correct information, click Next.

At the Organization Information screen, enter your information (e.g. name of Organization and administrator’s email address). Keep in mind that this information will be in your certificate (and your CSR if you submit that for a non-self-signed certificate) that is used to protect both Profile Manager and Open Directory communications. Click Next.

At the Confirm Settings screen, make sure the information that will be used to configure Open Directory is setup correctly. Then click Set Up (as I’ve put a nifty red circle next to – although it probably doesn’t help you find it if it’s the only button, right?).

The Open Directory master is then created. Even if you’re tying this thing into something like Active Directory, this is going to be a necessary step. Once Open Directory is setup you will be prompted to provide an SSL Certificate.

This can be the certificate provided when Open Directory is initially configured, which is self-signed, or you can select a certificate that you have installed using a CSR from a 3rd party provider. At this point, if you’re using a 3rd party Code Signing certificate you will want to have installed it as well. Choose a certificate from the Certificate: drop-down list and then click on Next.

If using a self-signed certificate you will be prompted that the certificate isn’t signed by a 3rd party. Click Next if this is satisfactory.

You will then be prompted to enter the credentials for an Apple Push Notification Service (APNS) certificate. This can be any valid AppleID. It is best to use an institutional AppleID (e.g. push@krypted.com) rather than a private one (e.g. charles@krypted.com). Once you have entered a valid AppleID username and password, click Next.

Provided everything is working, you’ll then be prompted that the system meets the Profile Manager requirements. Click on the Finish button to complete the assistant.

When the assistant closes, you will be back at the Profile Manager screen in the Server application. Here, check the box for Sign Configuration Profiles.

The Code Signing Certificate screen then appears. Here, choose the certificate from the Certificate field.

Unless you’re using a 3rd party certificate there should only be one certificate in the list. Choose it and then click on OK. If you are using a 3rd party certificate then you can import it here, using the Import… selection.

Now that everything you need is in place, click on the ON button to start the service and wait for it to finish starting.

Once started, click on the Open Profile Manager link and the login page will open. Adminsitrators can login to Profile Manager to setup profiles and manage devices.

The URL for this (for mdm.pretendco.com) is https://mdm.pretendco.com/profilemanager. Use the Everyone profile to automatically configure profiles for services installed on the server if you want them deployed to all users. Use custom created profiles for everything else.

To enroll devices for management, use the URL https://mdm.pretendco.com/MyDevices (replacing the hostname with your own). Click on the Profiles tab to

From Profiles, you’ll need to install a Trust profile in order for the client to enroll. Tap or click on the Install button for the Trust Profile and complete the installation process.

Click back on the Devices tab. From here, click or tap on the Enroll button and complete the enrollment process on the client (following the defaults will suffice).

Once enrolled, you can wipe or lock the device from the My Devices portal. Management profiles from the MDM server are then used. Devices can then opt out from management at any time. Saving these two profiles to a Mac OS X computer then allows you to automatically enroll devices into Profile Manager using Apple Configurator.