Mac OS X Server,  Xsan

Setup DNS Server Running OS X Server 5

Under the hood, OS X Server has a number of substantial changes; however, at first the Server app (Server 5) appears to have had very few changes. The changes in the Server app were far more substantial in the El Capitan version (and Yosemite for that matter) of OS X Server. All of the options from OS X are still there and using the new command line interface for managing the service, there are far more options than ever before.

The DNS service in OS X Server, as with previous versions, is based on bind 9 (BIND 9.9.7-P2 to be exact). This is very much compatible with practically every DNS server in the world, including those hosted on Windows, OS X, Linux and even Zoe-R.

The first time you open the DNS Service click on the DNS service in the ADVANCED section of the list of SERVICES.

Screen Shot 2015-09-08 at 10.15.41 PM

Then, click on the cog wheel icon below the list of records and click on Show All Records.

Screen Shot 2015-09-08 at 10.16.09 PM

At the Records screen, you’ll now see forward and reverse record information. Click the Edit… button for the Forwarding Servers field. Here, you’ll be able to enter a Forwarders, or DNS servers that resolve names that the server you’re using can’t resolve using its own DNS records.

Screen Shot 2015-09-08 at 10.17.27 PM

Click the plus sign to enter the IP address of any necessary Forwarders. Enter the IP address of any Forwarding servers, then click OK to save your changes.

Screen Shot 2015-09-08 at 10.18.27 PM

Once back at the main DNS service control screen, click the Edit… button for Perform lookups for to configure what computers the DNS server you are setting up can use the DNS service that the server is hosting.

Screen Shot 2015-09-08 at 10.27.31 PM

At the Perform Lookups screen, provide any additional subnets that should be used. If the server should be accessible by anyone anywhere, just set the “Perform lookups for” field at the DNS service screen to “all clients”.

All you have to do to start the DNS is click on the ON button (if it’s not already started, that is). There’s a chance that you won’t want all of the records that are by default entered into the service. But leave it for now, until we’ve covered what everything is. To list the various types of records:

  • Primary Zone: The DNS “Domain”. For example, https://krypted.com/ would likely have a primary zone of krypted.com.
  • Machine Record: An A record for a computer, or a record that tells DNS to resolve whatever name is indicated in the “machine” record to an IP address, whether the IP address is reachable or not.
  • Name Server: NS record, indicates the authoritative DNS server for each zone. If you only have one DNS server then this should be the server itself.
  • Reverse Zone: Zone that maps each name that IP addresses within the zone answer with. Reverse Zones are comprised of Reverse Mappings and each octal change in an IP scheme that has records mapped represents a new Reverse Zone.
  • Reverse Mapping: PTR record, or a record that indicates the name that should respond for a given IP address. These are automatically created for the first IP address listed in a Machine Record.
  • Alias Record: A CNAME, or a name that points to another name.
  • Service Record: Records that can hold special types of data that describe where to look for services for a given zone. For example, iCal can leverage service records so that users can just type the username and password during the setup process.
  • Mail Exchanger Record (aka MX record): Mail Exchanger, points to the IP address of the mail server for a given domain (aka Primary or Secondary Zone).
  • Secondary Zone: A read only copy of a zone that is copied from the server where it’s a Primary Zone when created and routinely through what is known as a Zone Transfer.

Screen Shot 2015-09-08 at 10.26.44 PM

When you click on the plus sign, you can create additional records. Double-clicking on records (including the Zones) brings up a screen to edit the record. The settings for a zone can be seen below.

 Screen Shot 2015-09-08 at 10.28.19 PM

These include the name for the zone. As you can see, a zone was created with the hostname rather than the actual domain name. This is a problem if you wish to have multiple records in your domain that point to the same host name. Theoretically you could create a zone and a machine record for each host in the domain, but the right way to do things is probably going to be to create a zone for the domain name instead of the host name. So for the above zone, the entry should be https://krypted.com/ rather than mavserver.krypted.com (the hostname of the computer). Additionally, the TTL (or Time To Live) can be configured, which is referenced here as the “Zone data is valid for” field. If you will be making a lot of changes this value should be as low as possible (the minimum value here is 5 minutes). Once changes are made, the TTL can be set for a larger number in order to reduce the amount of traffic hitting the server (DNS traffic is really light, so probably not a huge deal in most environments using an El Capitan Server as their DNS server). Check the box for “Allow zone transfers” if there will be other servers that use this server to lookup records.

Additionally, if the zone is to be a secondary zone configured on another server, you can configure the frequency to perform zone transfers at this screen, how frequently to perform lookups when the primary name server isn’t responsive and when to stop bothering to try if the thing never actually ends up coming back online. Click on Done to commit any changes made, or to save a new record if you’re creating a new zone.

“Note: To make sure your zone name and TLD don’t conflict with data that already exists on the Internet, check here to make sure you’re not using a sponsored TLD.” — https://krypted.com//mac-os-x/dont-go-near-there-sponsored-top-level-domain-names/

Double-click on a Machine record next (or click plus to add one). Here, provide a hostname along with an IP address and indicate the Zone that the record lives in. The IP Addresses field seems to allow for multiple IPs, which is common in round robin DNS, or when one name points to multiple servers and lookups rotate amongst the servers. However, it’s worth mentioning that when I configure multiple IP addresses, the last one in the list is the only one that gets fed to clients. Therefore, for now at least, you might want to stick with one IP address per name.

Screen Shot 2015-09-08 at 10.29.37 PM

Note that the above screen has the domain in the zone field and the name of a record, such as www for the zone called, for example, krypted.lan. Click Done to commit the changes or create the new record.

Next, let’s create a MX record for the domain. To create the MX for the domain, click on the plus sign at the list of records.

Screen Shot 2015-09-08 at 10.31.46 PM

Select the appropriate zone in the Zone field (if you have multiple zones). Then type the name of the A record that you will be pointing mail to. Most likely, this would be a machine record called simply mail, in this case for krypton.lan, so mail.krypted.lan. If you have multiple MX records, increment the priority number for the lower priority servers.

As a full example, let’s create a zone and some records from scratch. Let’s setup this zone for an Xsan metadata network, called krypted.xsan. Then, let’s create our metadata controller record as starbuck.krypted.xsan to point to 10.0.0.2 and our backup metadata controller record as apollo.krypted.xsan which points to 10.0.0.3. First, click on the plus sign and select Add Primary Zone.

Screen Shot 2015-09-08 at 10.33.11 PM

At the zone screen, enter the name krypted.xsan, check the box for Allow zone transfers (there will be a second server) and click on the Done button. Click on the plus sign and then click on Add Machine record.

Screen Shot 2015-09-08 at 10.33.56 PM

At the New Machine Record screen, select krypted.xsan as the Zone and then enter starbuck as the Host Name and click on the plus sign for IP Addresses and type in 10.0.0.2. Click on Done to commit the changes.

 Screen Shot 2015-09-08 at 10.34.35 PM

Repeat the process for Apollo, entering apollo as the Host Name and 10.0.03 as the IP address. Click Done to create the record.

Setting Up Secondary Servers

Now let’s setup a secondary server by leveraging a secondary zone running on a second computer. On the second El Capitan Server running on the second server, click on the plus sign for the DNS service and select Add Secondary Zone.

Screen Shot 2015-09-08 at 10.25.19 PM

At the Secondary Zone screen, enter krypted.xsan as the name of the zone and then the IP address of the DNS server hosting that domain in the Primary Servers field. Click Done and the initial zone transfer should begin once the DNS service is turned on (if it hasn’t already been enabled).

Managing DNS From The Command Line

Now, all of this is pretty straight forward. Create a zone, create some records inside the zone and you’re good to go. But there are a lot of times when DNS just needs a little more than what the Server app can do for you. For example, round robin DNS records, bind views, etc. Therefore, getting used to the command line is going to be pretty helpful for anyone with more than a handful of records. The first thing to know about the DNS command line in OS X El Capitan Server is to do everything possible using the serveradmin command. To start the service, use the start option:

sudo serveradmin start dns

To stop the service, use the stop option:

sudo serveradmin stop dns

To get the status of the service, including how many zones are being hosted, the last time it was started, the status at the moment, the version of bind (9.8.1 right now) and the location of the log files, use the fullstatus option:

sudo serveradmin fullstatus dns

A number of other tasks can be performed using the settings option. For example, to enable Bonjour Client Browsing, an option previously available in Server Admin, use the following command:

sudo serveradmin settings dns:isBonjourClientBrowsingEnabled = yes

Subnets can be created programmatically through serveradmin as well. Let’s look at what our krypted.xsan subnet looks like, by default (replace your zone name w/ krypted.xsan to see your output):

sudo serveradmin settings dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan

Now, let’s say we’d like to disable bonjour registration of just this zone, but leave it on for the others on the server:

sudo serveradmin settings dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:bonjourRegistration = no

The entire block can be fed in for new zones, if you have a lot of them. Just remember to always make sure that the serial option for each zone is unique. Otherwise the zones will not work properly.

While serveradmin is one way to edit zone data, it isn’t the only way, you can also use the dnsconfig options described in https://krypted.com//?p=45195. In /private/var/named are a collection of each zone the server is configured for. Secondary zones are flat and don’t have a lot of data in them, but primary zones contain all the information in the Server app and the serveradmin outputs. To see the contents of our test zone we created, let’s view the /Library/Server/named/db.krypted.xsan file (each file name is db. followed by the name of the zone):

cat /var/named/db.krypted.xsan

Add another record into the bottom and stop/start DNS to immediately see the ramification of doing so. Overall, DNS is one of those services that seems terribly complicated at first. But once you get used to it, I actually find manually editing zone files far faster and easier than messing around with the Server app or previously Server Admin. However, I also find that occasionally, because the Server app can make changes in there that all my settings will vanish.

Troubleshooting is another place where the command line can be helpful. While logs can be found in the Server app, I prefer to watch log entries live as I perform lookups using the /Library/Logs/named.log file. To do so, run tail -f followed by the name of the file:

tail -f /Library/Logs/named.log

Also, see https://krypted.com//mac-os-x-server/os-x-server-forcing-dns-propagation for information on forcing DNS propagation if you are having issues with zone transfers. Finally, you can manage all records within the DNS service using the new /Applications/Server.app/Contents/ServerRoot/System/Library/PrivateFrameworks/DNSManager.framework/dnsconfig command line tool. I’ve written an article on managing DNS using this tool, available here.